[Elecraft] K3 with Heil PR781 Speech Processor or Pre-Amp?

[Bill W5WVO]

Sorry, my bad. I meant the H or L gain range settings in the MIC
SEL entry of the main menu. In MIC SEL, tap "1" to toggle between
Low and High mic gain range for the selected mic. Use the High
setting for most Heil mics.

That's what I get for answering a question off the top of my head.
Sorry.

Bill W5WVO


----- Original Message ----- 
From: "Radio Amateur N5GE" <n5ge at n5ge.com>
To: <elecraft at mailman.qth.net>
Sent: Monday, December 07, 2009 7:13 PM
Subject: Re: [Elecraft] K3 with Heil PR781 Speech Processor or
Pre-Amp?


> On Mon, 7 Dec 2009 17:36:52 -0700, "Bill W5WVO"
<w5wvo at cybermesa.net>
> wrote:
>
> Bill please explain to me how the AF Gain changes the Mic input
level
> to the TX.  Did you mean to say Mic Gain?
>
> Tom, N5GE
>
> n5ge at n5ge.com
> K3 #806 with SUB RX, K3 #1055, PR6,
> XV144, XV432, KRC2,
> W1, 2 W2's and other small kits
>
> 1 K144XV on order
>
> http://www.n5ge.com
> http://www.swotrc.net
>
> >You probably have the AF GAIN parameter in CONFIG set to LOW
> >(which I believe is the default). Set it to HIGH, and you
should
> >have plenty of audio from Heil mics, which tend to be a little
on
> >the low-output side.
> >
> >Bill W5WVO
> >
> >
> [snip]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
http://www.qsl.net/donate.html