[Elecraft] K3 PSK31 split freq?

[Joe Subich, W4TV]

Tom, 

> Hello, using K3 #250 here with 3.63 firmware, etc. Today there 
> was a V5/DJ on 17m on PSK31. He was calling CQ and listening up. 
> When I tried to go split I got a "SPL N/A".

Which data sub-mode were you using, DATA_A?  Or were you using 
PSK_D with paddle transmission?  

I have no problem with split in FSK_D and AFSK_A ... just be 
sure that both VFOs are set to the same mode (tap A>B twice 
then tune VFO B off and invoking split). 

> Any way to do split mode in PSK? 

You can also use XIT or for narrow splits simply disable the 
"net" function in the PSK31 software if you are not using PSK_D. 

73, 

   ... Joe, W4TV 
  



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> cx7tt at 4email.net
> Sent: Sunday, December 06, 2009 10:12 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 PSK31 split freq?
> 
> 
> Hello, using K3 #250 here with 3.63 firmware, etc. Today there 
> was a V5/DJ on 17m on PSK31. He was calling CQ and listening up. 
> When I tried to go split I got a "SPL N/A". I vaguely remember 
> someone recently  having same issue and I went to the K3 wiki 
> to do a search but could not find anything. The K3 will do split 
> for AFSK, FSK and Data A. 
> The manual 
> does not mention this, at least not on p36 under SPLIT/Cross mode ops 
> nor on page 31 DATA modes. Any way to do split mode in PSK? 
> What am I missing? Tnx 73 Tom CX7TT