[Elecraft] K3 Hardware Updates

[Brett Howard]

I wasn't hearing the noise at all and was "maybe" barely hearing the
noise w/ no antenna connected.  I don't think I'd have noticed it unless
someone told me to look though...

There will be no unintended results as long as you carry out the mod as
intended.  

Good luck!  I've installed (and tested) the receiver protection mod and
it works a trick!  Gives some very nice piece of mind for a radio that
makes it out into the field every year for FD!

~Brett

On Sun, 2009-08-23 at 15:40 -0400, Roy Morris wrote:
> Now that my K3s have v. 3.25 firmware, I am thinking about installing the wire mod for the automatic front-end protection.  While I have access to the PCB, why not go ahead and install the VFO tuning noise reduction mod even though I do not experience noise during VFO rotation on 6, 10, and 60 meter bands.  You might say "if it ain't broke, don't fix it".   I would like to know if making the VFO tuning noise reduction mod could have a down side of unintended results.  Roy Morris  W4WFB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html