[Elecraft] Case for noise generator

[Joe Planisky]

If one has the equipment and skill to drill a 1/2 inch hole in very  
thin sheet metal, the XG2 fits perfectly in an Altoids mint box.  Take  
the rubber feet off and put an old credit card in the bottom to  
prevent the solder joints from shorting to the case.  The top pops  
open for easy access to all the controls.

73
--
Joe KB8AP

On Aug 21, 2009, at 6:29 PM, Joe Subich, W4TV wrote:

>
>
>> I would not advocate expansion to any other controls such as the
>> XG2 bandswitch or the pots on the 2T-GEN since they are not used
>> as often as an on/off switch.
>
> I would be interested in a case for the XG2 but it would need at
> least a screwdriver hole for the bandswitch and possibly one
> to reach the output level (slide) switch.
>
> 73,
>
>   ... Joe, W4TV