[Elecraft] K1 FRONT PANEL BOARD

[Don Wilhelm]

Steve,

You are mainly checking for solder bridges in that test, and a solder 
bridge in much more likely between pins 1 and 2 than it is between 1 and 40.

73,
Don W3FPR

Steve Howard wrote:
> On page 21 of the K1 manual it says to check the adjacent pads on U1
> Does that mean checking across ?
> for ex pin 1 to pin 40 , pin 2 to pin 39 etc or does that mean
> pin 1 to pin 2, then pin 2 to pin 3 etc
> thanks,
>
> Steve 
>   
>