[Elecraft] Question K3

[Dick Dievendorff]

The logging software can acquire the VFO B frequency at any time by issuing
the K3's "FB;" command.

It might want to do this when you're in split frequency mode, which is
indicated in the response to the IF command.

This might require some input from your logging program's author.

Dick, K6KR

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of tom wylie
Sent: Sunday, August 16, 2009 12:57 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Question K3

Through habit with my MP quite often in Contesting or pileup woking, I 
TX on my 2nd VFO and use the main VFO as a sort of RIT with all its 
filters etc.

When I do this with the K3, the frequency being logged by my logging 
software (logger32) is ALWAYS the main VFO frequency, which obviously 
moves as I tune.

Is there any way to tell my logging software the frequency of VFOB?

Tom
GM4FDM / GA4FDM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html