[Elecraft] k2 receiver shift problem fixed, now tx shift problem

[luca amendola]

Hi
Don the problem was again in the bfo.
I re-did again cal fil using the tom's procedure.
I tuned bfos with the graph spectrum.
Finally the bfo is shifted exatly of 1.2 khz.
the same values of cw nor bfo applied to cw rec cal , produce a perfect 
centered filters in cw rev!
what does it mean?
luca
----- Original Message ----- 
From: "luca amendola" <luca.amendola at uniroma1.it>
To: <Elecraft at mailman.qth.net>
Sent: Monday, August 17, 2009 1:19 AM
Subject: [Elecraft] k2 receiver shift problem fixed, now tx shift problem


> hi friends
> my last message was blank because I sent it via web!
> as tom and don suggested I re-calibrated all filters with the cal fil 
> option and the receiver shift now is fixed.
> unfortunally I found a minor problem in tx mode: my tx frequency is around 
> 0.6 khz up.
> so I'm serching help again. hihi
> any suggest?
> thanks
> luca
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html