[Elecraft] Auto-Notch Broken in 3.25 (I probably missed this)

[Mike Harris]

G'day,

To hopefully settle this, at least for my own case, I reloaded Beta 
3r19 and did the following test:

14195kHz SSB, AGC F.  S7 signal from my K2.  With my line out 
setting this gave a -46dB signal displayed in Spectrogram 16. 
Applying auto notch reduced this to -87dB or better.

Reloaded Beta 3r25.  With the same set up the signals displayed 
were -46dB notch off, -72dB notch on.

I conclude that something significant has changed with auto notch.

Regards,

Mike VP8NO


----- Original Message ----- 
From: "Ron D'Eau Claire" <ron at cobi.biz>
To: "'hb9brj'" <hb9brj at gmail.com>; <elecraft at mailman.qth.net>
Sent: Sunday, August 16, 2009 4:21 PM
Subject: Re: [Elecraft] Auto-Notch Broken in 3.25 (I probably missed 
this)


> Strange - it works just as described in the Owner's manual here: 
> auto notch
> on SSB, manual (only) on AM/CW/DATA.
>
> Is it possible your AGC was turned off?
>
> Ron AC7AC
>
> -----Original Message-----
>
> Dick Roth KA1OZ wrote:
>>
>> Tried listening for the Elecraft SSB net at 1800.  There was a
>> heterodyne or other interfering signal on 14.316.  I tried to use
>> Auto-Notch, but nothing changed.  Then I went to manual and 
>> notched it
>> out completely.
>>
>
> Same thing here. Auto Notch is gone in 3.25.
>
> 73, Markus HB9BRJ