[Elecraft] Some P3 Details

[Brett Howard]

Is there an ability for the K3 to display information on the P3 screen?
Such that it may be used as a larger output for RTTY/CW/PSK decoded
information.  This way one can not only see more text but also use
decode while seeing both VFO freqs.

~Brett (KC7OTG)

On Sat, 2009-08-15 at 19:23 -0700, Wayne Burdick wrote:
> In answer to some of the questions heard at the hamfest and posted here:
> 
> - the P3 can go left or right of the K3
> 
> - the screen refresh rate will be selectable; the prototype was  
> running at about six times/second, but we hope to increase that to 20/ 
> sec
> 
> - there are eight programmable switch functions that could be used as  
> instant K3 band selects and/or other K3 or P3 functions
> 
> - it could be used with other rigs with only firmware changes, but we  
> have no immediate plans in this regard
> 
> 73,
> Wayne
> 
> 
> 
> 
> Sent from my iPhone
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html