[Elecraft] Band changing/mode changing

[Merv Schweigert]

Yep caught that right off..    I currently have M1 set for CW end of each
band and M2 set for SSB. 

I just came up with my own solution I think, 
VFO A 14025   VFO B 14027  SPLIT ON  hit V>M3
Hit M>V M2 I go to SSB set freq for
VFO A  14195   VFO B 14205 SPLIT ON hit V>M4

now all I have to do to toggle between pile ups is
hit either M>V  M3 or M4

Just have to remember if I tune either VFO to hit the
appropriate V>M3 or 4 to put the new freq in memory.

That still leaves my M1 set for CW on each band and
M2 set for SSB for each band.  

Lots of button pushing, will help a lot of the double tap
of V>M comes along to prohibit my fat finger errors.

Not to reopen another thread but band stacking would
fix all this button pushing so easy. 
Thanks guys  73 Merv KH7C
> Merv . . .
>
> Think the typo-gremlin hit Hank there.  He meant to say . . .
>
> Now M>V M1 and you are on CW pileup
> And M>V M2 and you are on the SSB pileup
>
>
> Likewise the next paragraph should read . . .
>
> " . . . be VERY careful to use the M>V button -- do not miss and use the 
> V>M button because you will end up losing . . ." etc.
>
>
> 73,
>
> Kent  K9ZTV
>
>
>
> .k8dd. wrote:
>   
>> Now V>M M1 and you are on the CW pileup
>> And V>M M2 and you are on the SSB pileup
>>
>> But ..... In the heat of switching back and forth you must be VERY 
>> careful to use the V>M button - do not miss and use the V>M button 
>> because you will end up losing one of the memories and have two memories 
>> the same.
>>
>>     
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>