[Elecraft] PSK-D Mode

[Greg - AB7R]

Bud,

PSK-D mode is only available for operating PSK directly from your CW paddles 
connected to the paddle input.

or

Using the terminal pane on the K3 Utility program.  There is no provision for PSK-D 
keying from soundcard  programs. 

If using a soundcard/computer, use Data-A.  If you are out in the field and/or no 
computer is available, use PSK-D with your paddles.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Mon Aug 10  7:12 , "Bud Governale, W3LL"  sent:

>I made a few PSK31 QSO's today sending in DATA-A mode.
>
>However, I like the apparent benefit to PSK-D mode where there is no need to watch 
ALC levels.
>
>I use FSK-D for RTTY which works very well with no need to watch audio levels.
>
>
>In PSK-D, I can Key and send PSK. In the monitor I hear what sounds like PSK being 
sent and the wattmeter shows full 
>quivering
>power out.
>However, no one responds to me. I did a test with one station switching back and 
forth between Data-A and PSK-D to prove
>the point.
>I don't know were the signal is going in PSK-D. It's apparently not on my receive 
frequency or its not PSK31.
>
>Firmware is 3.19 and software is DX4WIN using its PSK31 window.
>
>Maybe I don't understand the purpose of PSK-D.
>
>73,
>
>Bud W3LL
>w3ll at arrl.net
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html