[Elecraft] W1 - Power readout Low

[David Heinsohn]

  I recently built a W1.  It worked fine both via the LEDs and remotely 
via the puter.  About a week ago the indicated output power dropped such 
that it always shows less than 1.4w.  The selected output on the K2 is 
5w.  My old analog 200w scale power meter still shows about 5w as it did 
when the W1 was agreeing with it.  Any ideas what's changed that might 
cause this?  I've looked at the manual and checked the settings on the 
remote program.  Even locked the W1 to the 14w scale with no effect.

TNX
de
kd0r
David