[Elecraft] K2 Tuning knob resistance to tight
Tom Campie
tom.campie at gmail.com
Fri Aug 7 08:46:08 EDT 2009
Sam, loosen the screws in the knob, pull it away from the face a bit
and re-tighten. The resistance is "set" by the felt washer behind it.
If that doesn't fix your problem, you have something else going on
that I don't know about.
Good Luck
73
Tom
W0EA
On Fri, Aug 7, 2009 at 7:42 AM, Sam Morgan<ka5oai at gmail.com> wrote:
> I have been mainly using HRD and PowerSDR/IF to tune my K2 the last few months.
> This morning I reached over to tweak a signal and found the resistance on the
> main tuning know was really tight. I use to be able to use the edge of my finger
> and almost spin the dial it was so free, but now it's so tight that is no even
> possible.
>
> Is there an adjustment for this, a reason it may have happened? I fear something
> is in the process of breaking?
> --
> GB & 73
> KA5OAI
> Sam Morgan
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list