[Elecraft] K3 Audio Level and Heil Pro Set

[Paul Ferguson]

I would like to see this added to the Config Menu. I have low volume on 
headphones, and a few doses of this command fixes it. I was going to contact 
Elecraft support about it, but now I will wait for it to be added.

Paul
K5ESW
K3 #757

> Hi again Pete:
> 
> I forgot to mention something in my previous posting. Lyle gave me a command
> to send via the K3 Utility to temporarily increase the headphone volume. The
> premise being that if this proved satisfactory then it would be possible to 
> include such a volume adjustment in firmware (if enough people want it). 
> Open the K3 Utility and choose Command Tester. Enter the following code on 
> the top line and hit enter
> 
> !66;
> 
> Be sure to include all 4 characters. You can do this several times and the 
> volume will increase slightly each time. Unfortunately, it is not remembered
> if you cycle power.
> 
> 73,
> Mike K2MK
> 
> 
> 
> Peter Chamalian
> Sun, 02 Aug 2009 14:06:06 -0700
> 
> I've been enjoying my K3 but find the audio output in my Heil Pro Set is
> rather weak.  Is there a mismatch here or some setting that will boost the
> audio level?
> 
> Just for the record, I hae the latest production release firmware, speaker +
> phones is no.
> 
> Thanks,
> Pete, W1RM 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html