[Elecraft] PowerSDR-IF/IQ

[Doug Person]

Standard 15" LCD monitors with a resolution of 1024 x 768 are available 
on eBay for next to nothing ( less than $50 shipped).  Your next best 
choice would be a modern 15.6" monitor with a resolution of 1366  x 
768.  My local Walmart carries a decent one for only $98.  Consumer 
tastes are leaning toward 19" monitors and these are now the predominant 
configuration.  Typically with a 1440 x 900 resolution although some are 
higher at 1680 x 1050. The 19" is so common now that good mail order 
dealers sell them for $99 + shipping. (newegg.com for example).

I use a 19" 1680 x 1050 Acer monitor for my station computer and find it 
quite satisfactory.

Regards,

Doug -- K0DXV
(Master computer geek and Big Blue lifer)

Edward Dickinson, III wrote:
> I'm now getting to more in depth use of the LP-Pan, LP Bridge and
> PowerSDR-IF and soon PowerSDR-IQ with my K3.  Thanks to Larry, Scott and the
> gang at Aptos.
>
> I'm considering a second monitor dedicated to PowerSDR-IF/IQ...consumer
> grade or thereabouts.  It will be used via my main computer with an extended
> desktop.  It seems the PowerSDR window is about 1024 pixels x 615 pixels.
> An about 12" diagonal display with a trim sourround would be great.  A stand
> may not be necessary.  Less is more in this case.  What ideas are there
> about a VGA monitor that might fit the criteria?
>
> It's interesting to see the developments along the lines of SDR. 
>
>
> Best regards,
> Dick - KA5KKT
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>