[Elecraft] SDR-IQ users?
Icke
detlef.jahn at web.de
Sat Aug 1 10:59:58 EDT 2009
Hallo Greg,
using SDR-IQ with SpectraVue 2.34 you dont need a virtual com port - in the
SDR-IQ setup menu you must only select ext radio=Elecraft K3. Try SpectraVue
3.0 Beta 30, there are some more option as in 2.34.
'73 Detlef
Greg - AB7R wrote:
>
> Thanks Bruce. It didn't but that's because I don't have the K3
> connected directly to the SDR-IQ.
>
> What I had to do after some trial and error was to go to the USB
> device properties and tell it to set up a virtual com port (in device
> manager). Then I set LP-Bridge to the same port and restarted
> everything.
>
> Now after a little tweaking of the IF freq and zero-beating with a sig
> generator it seems right on and tracks/controls the K3 fine.
>
> 73
> Greg
> AB7R
>
>
> On Jul 31, 2009, at 3:46 PM, Bruce McLaughlin wrote:
>
>> Start up SDR. Then push the setup button and the cat submenu button
>> when it
>> comes up. You'll then see a choice of which com port you wish to
>> use along
>> with the other parameters that are necessary to be set up. That
>> should do
>> the trick.
>>
>> Bruce-W8FU
>>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gregory Fischer
>> Sent: Friday, July 31, 2009 6:16 PM
>> To: Elecraft Reflector
>> Subject: [Elecraft] SDR-IQ users?
>>
>> Looking for some assistance in setting up SDR-IQ. I ran the setup and
>> connected the IQ and it is receiving sigs from the K3's IF.
>>
>> The problem is I cannot get it to communicate with the K3 to follow
>> frequency changes from the radio....or when clicking on a signal to
>> have it change the radios frequency.
>>
>> I would have thought that after the setup I would find something for
>> the SDR-IQ in the device manager but I don't.....no com port setup for
>> it or anything. Did I miss a step somewhere?
>>
>> THanks
>> Greg
>> AB7R
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
--
View this message in context: http://n2.nabble.com/SDR-IQ-users--tp3365362p3369388.html
Sent from the Elecraft mailing list archive at Nabble.com.
More information about the Elecraft
mailing list