[Elecraft] K3 and Heathkit SB-610 monitor scope
KC2UEE
kc2uee at gmail.com
Thu Apr 30 23:11:18 EDT 2009
Hi Bob,
I've found a nice SB-620. Do you know if it will work with the K3 and it's
IF out as a spectrum analyzer?
73 de James K3JPS
Robert Naumann wrote:
>
>
> The SB610 is a transmit monitor scope. It is not a bandscope. The model
> SB620 was a bandscope.
>
> The SB610 is still very useful for monitoring your transmit signal through
> an amplifier for proper modulation and trapezoidal waveforms etc. Good
> luck finding parts.
>
> 73,
>
> Bob W5OV
> ex- "One of the Hams at Heath"
>
>
>
>> James I am not sure you will get value for money from an SB-610, they
>> date from the days when a decent oscilloscope was big and expensive.
>> These days 'scopes with the capabilities to monitor your peaks are
>> general purpose test items and don't cost much. The K3 also has a two
>> tone test oscillator built in. The IF output of the K3 is quite low
>> level and is centred on 8.215 MHz, not the final IF of 15 KHz.
>>
>> For my money, I would look for a general purpose oscilloscope for the
>> shack and an SDR receiver ranging from the low cost Softrock IF, to
>> LP-PAN or the more expensive general coverage ones. These will give you
>> a panoramic view of the band and be far more useful than an SB-610, even
>> if it could be converted to work at the K3 IF output.
>>
>> 73 Dave, G4AON
>> K3/100 #80, Perseus SDR
>> http://www.astromag.co.uk/k3/
>> ----------------------------------
>> I'm not very familiar with using monitor scopes, so please bear with me.
>> I'm interested in picking up a used Heathkit SB-610 in order to monitor
>> my
>> sideband wave forms. From what I understand, all I'd need to do is
>> connect
>> the antenna out of the K3 to the SB-610, and the antenna input to the
>> SB-610.
>>
>> Can anyone with experience with this scope know if it will work well with
>> the K3? I think this SB-610 has a 455KHz coil installed as well. I do
>> believe they can be switched out for a 4-6KHz coil for monitoring a
>> receiver's final IF. I don't recall what the final IF of the K3 is
>> operating at.
>>
>> 73 de James K3JPS
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
--
View this message in context: http://n2.nabble.com/K3-and-Heathkit-SB-610-monitor-scope-tp2741622p2751498.html
Sent from the Elecraft mailing list archive at Nabble.com.
More information about the Elecraft
mailing list