[Elecraft] K2 5233 alignment problems

[ON4DCP]

Hi Dan,



This sounds familiar to me. I had the same problem. 
The problem was that C6 was not correctly installed. C6 should be between
pin 1 and 3 of J15. I had it installed between pin 2 and 3. See p59 of the
owners manual and the schematic of the RF board sht 3.
Hope this helps.

With friendly greetings,
Michel


-- 
View this message in context: http://n2.nabble.com/K2-5233-alignment-problems-tp2744710p2746009.html
Sent from the Elecraft mailing list archive at Nabble.com.