[Elecraft] K3 AF line out to mic attenuation

[Steve Ellington]

Chris
Watch out for the DC phantom voltage on that laptop's mic jack. I doubt if 
you want to feed that back to the K3. Otherwise you should be ok to just do 
a direct feed. Hopefully you won't have any ground loop problems. An 
alternative would be to use a cheap external USB sound card.
Steve Ellington
N4LQ at carolina.rr.com
----- Original Message ----- 
From: "Chris Meagher" <cmeagher at activ8.net.au>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, April 29, 2009 8:53 PM
Subject: [Elecraft] K3 AF line out to mic attenuation


> Hello,
>
> I want to connect K3 audio line out to a Toshiba laptop which only has a 
> 3.5
> mic socket for audio in.
> Does anyone have recommendations for attenuation/impedance matching?
> I was thinking of a simple votage divider.
>
> Thanks,
>
> Chris VK2LCD
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html