[Elecraft] QSK With K3 and KW Amp

[Mike Cox]

I've run my SB-1000 with QSK-5 pin diode switch with no problems with my 
K3 using the KEY OUT signal.

-Mike, AB9V

Ed G wrote:
> Hello,
>      Is any anyone using one of the old DEO QSK-1500 full QSK switching
> units (or the similar PIN diode QSK unit from Ameritron) with their K3 and
> external amplifier? I haven't yet received my K3 but I would like to hook it
> up with my Heath SB-220 to run full QSK.  I suspect that I will need to use
> an external keyer (and not the one internal to the K3) to trigger the PIN
> diode switching electronics.  Same deal with software-generated CW.
>      If you are running full QSK this way with your K3, let me know if you
> experienced any problems setting up the switching, and if you are
> successfully running contest/computer software in the CW mode with full QSK.
> --Ed, N3CW--
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>