[Elecraft] k3 NR Audio level increase

[Joe Planisky]

The settings and steps are intended to demonstrate the issue, they're  
not necessarily typical operating settings.  Don had suggested that  
perhaps the cause was related to using NR with a narrow bandwidth.  I  
wanted to demonstrate that it happens at wide bandwidth as well.

73
--
Joe KB8AP

On Apr 25, 2009, at 8:21 AM, Dave Hachadorian wrote:
>
>
> If the snr is marginal, why would you set BW = 2.0?
>
> Dave Hachadorian, K6LL
> Yuma, AZ