[Elecraft] [K3] Boot loader failure (solution)

[Dick Dievendorff]

These messages don't indicate a failure. 

The K3 Utility sent a command to the K3 to reset itself to enter the boot
loader.  It's a progress status message, not an error message.

I considered wording the message to "Resetting K3 to enter boot loader", but
I think I'll just remove the message instead.  

I apologize for any confusion.  

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of wa6riv
Sent: Wednesday, April 22, 2009 6:11 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] [K3] Boot loader failure (solution)

I had an update failure this morning. 

"MCU firmware file hmcu0311.hex verified
Reset K3 to enter Boot Loader"

In the Elecraft K3 Utility, I tested communications. "4800 bps" 
I selected default. "Keep speed at 38,400 bps"
Load error occurred.
I reset my communications to 4800 bps and all worked fine.  

TNX Ted WP4CW
Window Vista
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html