[Elecraft] K3 New fw loader

[Joe Subich, W4TV]

Strange ... I'm also running 3.10 loaded with the new utility. 
I loaded 3.10, DSP1 2.15, DSP2, 2.15, FP 1.00 and the data 
tables twice.  Power was cycled power between the two uploads.  

I have not checked the second K3 ... it's offline at the moment 
waiting for me to make a couple of the updates. 

73, 

   ... Joe, W4TV 
 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dave 
> Hachadorian
> Sent: Friday, April 17, 2009 12:44 AM
> To: Elecraft reflector
> Subject: Re: [Elecraft] K3 New fw loader
> 
> 
> I just tried it once each on two different K3's, and they 
> each switched from FSK D to DATA A.
> 
> Both radios run 3.10, loaded with the new utility.
> 
> I never change modes with the mode switch (I use memories), 
> so I never would have noticed this if I hadn't specifically 
> tried to duplicate it.
> 
> Dave Hachadorian, K6LL
> Yuma, AZ
> 
> ----- Original Message ----- 
> From: "Joe Subich, W4TV" <lists at subich.com>
> To: "'Bob Serwy'" <bob at n9rs.com>
> Cc: <elecraft at mailman.qth.net>
> Sent: Friday, April 17, 2009 3:36 AM
> Subject: Re: [Elecraft] K3 New fw loader
> 
> 
> >
> > Just tried it five consecutive times and FSK D was
> > retained all
> > five times.
> >
> > 73,
> >
> >   ... Joe, W4TV
> >
> >
> >
> >> -----Original Message-----
> >> From: elecraft-bounces at mailman.qth.net 
> >> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bob Serwy
> >> Sent: Thursday, April 16, 2009 7:45 PM
> >> To: 'Lyle Johnson'; 'Brian Alsop'
> >> Cc: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] K3 New fw loader
> >>
> >>
> >> I just did the same steps (twice) and my data mode did 
> >> change
> >> to DATA A (both times).  Using 3.10.
> >>
> >> Bob Serwy - N9RS
> >>
> >> -----Original Message-----
> >> From: elecraft-bounces at mailman.qth.net
> >> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> >> Lyle Johnson
> >> Sent: Thursday, April 16, 2009 5:47 PM
> >> To: Brian Alsop
> >> Cc: elecraft at mailman.qth.net
> >> Subject: Re: [Elecraft] K3 New fw loader
> >>
> >> > Here are the steps.
> >> > 1) Set digital mode to FSK -D.   Verify it is there 
> >> > correctly
> >> > 2) Set mode to CW.
> >> > 3) Turn radio off .
> >> > 4) Turn radio back on
> >> > 5) Look at the digital mode.   It becomes DATA A.
> >>
> >> I followed these steps, and my Data mode remains FSK.
> >>
> >> 73,
> >>
> >> Lyle KK7P
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: 
> >> http://www.qsl.net/donate.html
> >>
> >> No virus found in this incoming message.
> >> Checked by AVG - www.avg.com
> >> Version: 8.5.287 / Virus Database: 270.11.59/2063 - 
> >> Release
> >> Date: 04/16/09 16:38:00
> >>
> >>
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: 
> >> http://www.qsl.net/donate.html
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: 
> > http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html