[Elecraft] K3 New fw loader

[Brian Alsop]

Guys,

I've been able to reproduce this.   No idea where it is coming from.   
It may not be the loader but something in 3.06 or 3.10.  Odd that I 
don't recall seeing it in many weeks of using 3.06.    Since I never use 
DATA A but switch a lot between FSK D, CW and SSB, it should have jumped 
out.

Here are the steps. 
1) Set digital mode to FSK -D.   Verify it is there correctly
2) Set mode to CW.
3) Turn radio off .
4) Turn radio back on
5) Look at the digital mode.   It becomes DATA A.

Will try a new download and reload of 3.10.

73 de Brian/K3KO
Dick Dievendorff wrote:

>I know of no code in the K3 Utility that intentionally changes the Data
>Submode. There are cases where the K3 Utility saves (and usually restores)
>some rig settings (notably Auto Info, Text to Terminal, K2 and K3 modes),
>and during the Tx Gain calibration test a number of rig parameters are
>changed (and for those I can, restored), but data submode is not one of the
>things I touch.
>
>Dick, K6KR
>
>
>-----Original Message-----
>From: elecraft-bounces at mailman.qth.net
>[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian Alsop
>Sent: Thursday, April 16, 2009 12:43 PM
>To: elecraft at mailman.qth.net
>Subject: [Elecraft] K3 New fw loader
>
>Installed this (1.2.3.18).  Removed old loader first.
>It appears to set the rig in AFSK A mode for digital overriding what was 
>last used.  My digital mode is always set to FSK D.
>Happened last night when testing with FW3.06 and today with FW3.10.  
>This did not happen with the older loader/FW3.06
>
>Anybody else seeing this?
>
>73 de Brian/K3KO
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>  
>