[Elecraft] PSK31 on K-3

[Greg - AB7R]

PSK-D does NOT work with the FSK pins on the ACCY connector.  PSK-D works with paddle 
input and ascii input from a terminal, such as the terminal tab of the K3 Utility 
program.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Tue Apr 14 11:58 , Iain MacDonnell - N6ML  sent:

>
>
>Ron Midwin wrote:
>> OK I finally got my computer hooked up thru the mic in / headphones jack
>> with 1/8 inch stereo cables connected to the line in/out on the K-3, and
>> have it working...
>> 
>> I also have the USB/serial adapter connected.  With this setup, I am using
>> HRD and Digital Master 780 successfully.
>> 
>> Is there a more elegant way to accomplish PSK31 on my K-3?  My PC is a HP
>> Laptop running Vista.  This setup kills my computer for Skype, since it ties
>> up the internal soundcard.  
>
>You could get a USB audio device and dedicate it to the radio interface,
>or(/and) get a USB headset to use with Skype.
>
>EMU-0202 is overkill for PSK, IMO - you should be able to find something
>for a fraction of the cost that'd perform fine. You don't need 192kHz
>sampling for this application ;)
>
>There is a "PSK D" mode too, which supposedly allows PSK input via the
>FSK pin on the accessory port, but I haven't tried that (or thought
>through how it'd work).
>
>     ~Iain / N6ML
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html