[Elecraft] K3: Optimizing filter offsets for SSB TX and RX

[Windy Dankoff]

YOU ARE RIGHT, Joe !!  I did my trials on USB. On LSB, I can tell by  
listening and re-adjusting that you are quite correct. It's back to  
zero for me.

    :-|

I await further comments.
Windy


On Apr 12, 2009, at 5:10 PM, Joe Subich, W4TV wrote:

>
> If you crank in an offset with the 8 pole filters be sure
> you test it with BOTH USB and LSB.  An offset that enhances
> low frequency response in USB will reduce the LF response in
> LSB (enhance high frequency response) and vice versa.
>
> 73,
>
>   ... Joe, W4TV
>
>>