[Elecraft] K3: Audio Mixer

[David Gilbert]

That's VERY slick!  And certainly simpler than using an external mixer.  
As you say, it goes away with a power cycle, and also when I turn the 
SUB off then back on.  So far it seems to survive most other changes 
I've tried, though  ... mode, band, filter, VFO, etc.

I've already programmed one of the command tester macros for it.  Is 
there an equivalent command to set it back to normal?

Nice work!

73,
Dave   AB7E



Lyle Johnson wrote:
> The adventurous may try the following.  These commands do not stick 
> through power cycles, and may not remain through mode changes or other 
> commands.  In other words, the radio may revert back to normal operation 
> at any time :)
>
> If you want Main Rx in both ears and leave the Sub Rx in the right ear, 
> go to the command tester and type:
>
> !bed7;
>
> If you want the Sub Rx in both ears and the Main only in the left, type:
>
> !bef9;
>
> Be sure SPKRS+PH is OFF, or SPKRS=2, with these commands.
>
> Enjoy!
>
> 73,
>
> Lyle KK7P
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>