[Elecraft] Need Help with K2 and KPA100 hook up
Don Wilhelm
w3fpr at embarqmail.com
Fri Apr 10 16:36:12 EDT 2009
Jerry,
1st question - did the seller provide the Control Cable? - a cable with
3 DB-9 connectors on it? If not you will need to build one (if you
eliminate computer control of the K2, you can do it with only 2 DB-9
connectors)
CAUTION - do not use a computer serial cable.
If you do not have the cable, follow the instructions in the KAT100
manual page 25.
If you do have the Control Cable, connect the end with 2 cables
installed to the K2 KIO2 AUX I/O connector. Another caution, that is
*not* an RS-232 connector, although it does contain 3 of the RS-232
defined signals. Most of the signals are internal K2 signals for
connecting to Elecraft external accessories (like the KAT100).
Connecting a PC serial port to this connector with a standard serial
port cable can damage the K2.
The short end of the Control Cable plugs into the KAT100 (or KPA100) AUX
I/O connector. The end with the female DB-9 connector can go to the PC
serial port, or it can just be left unplugged.
You will need a short length of coax with BNC connectors on both ends.
Connect one to the BNC RF output jack on the K2 - if it is equipped with
the KAT2, connect to the ANT1 jack. The other end connects to the AUX
RF jack on the KAT100. (the KAT100 connectors are on the bottom of the
rear panel and the KPA100 connectors are on the top rear cover).
Another piece of short coax needed - this one has PL-259 connectors on
both ends. Connect it between the KPA100 antenna jack and the KAT100 RF
IN jack
73,
Don W3FPR
Jerry J. wrote:
> I just bought a K2 with the KPA100 build into the KAT100 tuner box. Can someone tell me how to connect
> the two together. I talked to the guy I bought it from and he use the K2 for QRP and forgot how to hook them together. Jerry
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.51/2052 - Release Date: 04/10/09 06:39:00
>
>
More information about the Elecraft
mailing list