[Elecraft] New SSB Squelch function

[Lance Collister, W7GJ]

I downloaded the latest beta with the squelch and tried to set it up, but I wonder if 
there is something about it that I don't understand, or need to adjust differently. 
I was hoping I could basically set the squelch with the RF/SQL knob on the front 
panel...crank it all the way clockwise for full on with no squelch (for trying to 
detect weak signals in the noise) and then back it off as desired to set the squelch 
threshold for the strength of the signals required to break the squelch.

However, in my setup it seems to function just the opposite!  The squelch is always 
on when the RF/SQL control is fully clockwise, and when I back off on it, it OPENS 
the squelch as some signal level greater than the no-signal noise level.  How do you 
adjust it to listen with the RF gain fully open so you can hear the noise level?

Right now, the only solution I have been able to find is to disable the squelch 
entirely in the CONFIG.  MNI TNX for any guidance!  VY 73, Lance
-- 
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8)
P.O. Box 73
Frenchtown, MT  59834  USA
QTH: DN27UB
TEL: (406) 626-5728
URL: http://www.bigskyspaces.com/w7gj
2m DXCC #11/6m DXCC #815