[Elecraft] KRX3 antenna input

[Ken Kopp]

There's one ... at least ... condition where the BNC input jack
and cable is useful.  I bought the 2nd RX -only- to monitor 6M
for band activity while I'm using the radio on other bands.  The
BNC allows me to connect a 6M GP to the 2nd RX.  My ANT 2 
connector is connected to the 6M beam.

A tip:  The cable from the BNC is -much- easier to plug into the 
2nd RX by removing the KIO3 panel and the boards behind it 
than removing or even partially lifting the 2nd RX to connect the 
cable to the input.

73! Ken Kopp - K0PP
      ElecraftCovers at rfwave.net