[Elecraft] K3: N1MM beginner question

[Dave Hachadorian]

n1mm/config/ports/on K3 control com press "set" button/ 
uncheck "radio PTT via command."

Dave Hachadorian, K6LL
Yuma, AZ


----- Original Message ----- 
From: "Erik N Basilier" <ebasilier at cox.net>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, April 07, 2009 9:37 PM
Subject: [Elecraft] K3: N1MM beginner question


> Configuration:
>
> Computer serial port connected to K3, computer USB 
> connected to Winkeyer, Winkeyer Key output connected to K3 
> Key In, No connection to K3 PTT in, CONFIG PTT-KEY 
> OFF-OFF, QSK full, nothing connected to K3 ACC.
>
> Send CW message from N1MM:
>
> I want QSK but the TX LED stays on during the message. 
> Something is asserting PTT during the message, and the 
> only source of this I can think of would be a software 
> command from N1MM to the K3. I have looked for a way to 
> turn this off in N1MM, but haven't found one. Please help.
>
> For other modes I probably want a connection to the K3 PTT 
> input, I just don't want it to be activated in CW.
>
> BTW I tried to post on the Yahoo N1MM group, but the 
> server was unavilable.
>
> Thanks and 73,
>
> Erik K7TV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html