[Elecraft] K3 with PW-1 and Microham MKII

[Joe Subich, W4TV]

> The PW-1 is not following at all.

Have you followed the configuration steps in the PW-1 manual to 
"lock" it to the CI-V address used in the microKEYER II? 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Gaynard
> Sent: Monday, April 06, 2009 6:58 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 with PW-1 and Microham MKII
> 
> 
> How do I get the PW-1 to follow the K3?  I have the MKII 
> cabled to the CI-V port on the PW-1 and to the same 
> connection as my SteppIR on the MKII.  The SteppIR follows 
> perfectly.  The "PW-1 on Radio bus" box is greyed out.  The 
> PW-1 is not following at all.
> 
>  
> 
> John
> 
>  
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html