[Elecraft] K3 Assembly

[Don Wilhelm]

Frank,

No need for it to go on "The List" - it is reality now.  You can set it 
up for any combination of 'which 0-9 button corresponds to each band' - 
make your own decisions on that.  See "Quick Memories" in the manual, 
the CONFIG:MEM 0-9 and CONFIG: BAND SEL in the menu listing.  There is 
also information retaining the "last used frequency" addition in the 
firmware release notes.

73,
Don W3FPR

W6NEK wrote:
> That is an outstanding suggestion Joe!
> Simple and elegant.  I hope it makes it to "The List"!
>
> Frank- W6NEK
>
> ----- Original Message ----- 
> From: "Joe Subich, W4TV" <lists at subich.com>
> Sent: Saturday, April 04, 2009 4:27 PM
> Subject: Re: [Elecraft] K3 Assembly
>
>
> <SNIP> 
>   
>> All that's necessary is to set "MEM 0-9" to "Band Sel" in 
>> the configuration menu.  After that, M->V followed by 1 
>> through 0 will recall the last used frequency/mode on each 
>> band 160 -> 6 (1 = 1.8, 2 = 3.5, 3 = 7, 4 = 10, 5 = 14, 
>> 6 = 18.1, 7 = 21, 8 = 24.9, 9 = 28 and 0 - 50 MHz). 
>>
>>     
>