[Elecraft] FW 3.06 - 6m missing
Arie Kleingeld PA3A
pa3a at xs4all.nl
Sat Apr 4 02:54:24 EDT 2009
Dave,
6 m is mapped in . I double checked that,
I will try some older versions of the FW this morning.
Arie PA3A
-----Oorspronkelijk bericht-----
Van: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] Namens Dave G4AON
Verzonden: zaterdag 4 april 2009 8:42
Aan: elecraft at mailman.qth.net
Onderwerp: Re: [Elecraft] FW 3.06 - 6m missing
Mine is OK, have you checked 6m isn't also mapped out?
73 Dave, G4AON
K3/100 #80 f/w 3.06
=======================
Loaded FW 3.06 yesterday. All OK except....
This morning I cycled through the bands and found 6 meters missing. I am
sure that 6m is mapped in. Checked that with K3-EZ and in the config.
What happens is this:
Cycle up through the different bands and after the 10m band comes 6m? No
band noise, not even with pre-amp on. AND the display says 30.000.00
Touching the VFO changes the display to 29.999.99 and the band noise
comes in. So probably I'm back at 10m.
Another thing I tried was this:
Switch to config and go to the band mapping.
Cycle through the bands until you reach 6m, and yes it is mapped in.
Leave config. Display is at 30.000.00 and K3 reacts the same as
mentioned above.
Only band I have mapped out is 60m.
Am I the only one with this problem? Or maybe I've missed something.
73
Arie PA3A ______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list