[Elecraft] Is K3 SWR Available via CAT Commands

[Dick Dievendorff]

I read the SWR during the Tx Gain calibration procedure with the ATU (if
present) in BYP.  I have set the Tune Power to a specific level (5 or 50
watts in TxG calibration) and then I do the CAT command equivalent of
pushing the TUNE button. SWR appears in the VFO A area, which can be read
with DS;  

Dick, K6KR

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Chuck-NO5W
Sent: Friday, April 03, 2009 8:52 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Is K3 SWR Available via CAT Commands

Is it possible to read the K3 SWR via CAT commands with the ATU 
bypassed?  I saw a similar question for the K2 in the archives but 
nothing on the K3.

73/Chuck/NO5W
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html