[Elecraft] [K2] KPA-100 D13 Diode issue

[Jim Miller KG0KP]

What is the color code on the resister?  This will determine if it is "out 
of tolerance" or if you have a wrong resister.

73, Jim

----- Original Message ----- 
From: "Ron Greene" <rgtech1 at roadrunner.com>
To: <Elecraft at mailman.qth.net>
Sent: Friday, April 03, 2009 10:14 AM
Subject: [Elecraft] [K2] KPA-100 D13 Diode issue


> I'm nearing completion of my new KPA100 and running the resistance tests
> (manual page 43) which are just prior to the final few steps and the
> last item on that list is diode D13 which is supposed to be >10K.
> However I get 8.5 K measured with two different meters.  Every test up
> to this point has been OK.  Suggestions?
>
> Ron, N8IB
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>