[Elecraft] K3 and PR6 question

[Andy GD0TEP]

Greg, what I was trying to do was use the K3 like my 756pro does, i.e. TX on
the main socket out, but receive on the RX antenna, all the time maintaining
the advantage of the PR6.

73 Andy
http://www.gd0tep.com


-----Original Message-----
From: Greg - AB7R [mailto:ab7r at cablespeed.com] 
Sent: 02 April 2009 15:45
To: elecraft at mailman.qth.net; 'Andy GD0TEP'
Subject: Re: [Elecraft] K3 and PR6 question

I suppose if  you REALLY wanted to do this you could use a second PR6 and
run your 

RX ant to the PR6 input and the output connected to the AUX RF connector if
its 

installed and KRX3 set to BNC.  Then usinging a HOLD of the RX ANT button
select 

the AUX position.



-------------------------

73,

Greg - AB7R

Whidbey Island WA

NA-065





On Thu Apr  2  7:39 , "Andy GD0TEP"  sent:



>OK Bud, that answers that question then...  thanks.

>

>73 Andy

>http://www.gd0tep.com

>

>

>-----Original Message-----

>From: Bud Semon N7CW [n7cw at cableone.net','','','')">n7cw at cableone.net] 

>Sent: 02 April 2009 14:57

>To: 'Andy GD0TEP'; elecraft at mailman.qth.net

>Subject: RE: [Elecraft] K3 and PR6 question

>

>Hi Andy,

>

>There was a fairly long discussion between Wayne, W0MU and myself on this

>subject, mostly on the reflector.  The answer was no - you can't use the
PR6

>(as installed on the radio) inline on the 2nd receiver to monitor 6M while

>operating on other bands.

>

>73, Bud  N7CW

>

>-----Original Message-----

>From: elecraft-bounces at mailman.qth.net

>[elecraft-bounces at mailman.qth.net','','','')">elecraft-bounces at mailman.qth.
net] On 

Behalf Of Andy GD0TEP

>Sent: Thursday, April 02, 2009 5:57 AM

>To: elecraft at mailman.qth.net

>Subject: [Elecraft] K3 and PR6 question

>

>Hello to the group.

>

>I must be missing something in the manual... 

>

>If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on

>the sub receiver that is connected to the antenna via the BNC RX antenna

>(with the SUB indicated on the display) is the PR6 pre-amp in line with the

>sub receiver or not?

>

>73 Andy

>http://www.gd0tep.com

>

>

>______________________________________________________________

>Elecraft mailing list

>Home: http://mailman.qth.net/mailman/listinfo/elecraft

>Help: http://mailman.qth.net/mmfaq.htm

>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net

>

>This list hosted by: http://www.qsl.net

>Please help support this email list: http://www.qsl.net/donate.html

>

>

>______________________________________________________________

>Elecraft mailing list

>Home: http://mailman.qth.net/mailman/listinfo/elecraft

>Help: http://mailman.qth.net/mmfaq.htm

>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net

>

>This list hosted by: http://www.qsl.net

>Please help support this email list: http://www.qsl.net/donate.html