[Elecraft] KAT3 settings saved per band

[Kenneth Moorman]

I do something similar with ANT1 and ANT2 with ANT2 having an external tuner
out at the antenna feedline base, and ANT1 always being tuned by the
internal tuner, and would like some way to associate the ANT1 as AUTO and
ANT2 as BYPASS (or vice versa), plus the ability to use it as it now is for
those who don't have this sort of antenna set up.  Just a thought.

73,

Ken, NU4I

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
Steven.Zabarnick at notes.udayton.edu
Sent: Monday, September 29, 2008 9:01 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] KAT3 settings saved per band


I use two doublet antennas, one hooked to ANT1 through a balun for 40M
which uses the KAT3 tuner, and a second (ANT2) in which I bypass the KAT3
and use an external Palstar BT1500A balanced tuner for 30-10M. Currently,
when changing bands I have to remember to bypass/set the KAT3 correctly. I
would like to see the KAT3 bypass/auto setting saved per band as is
commonly done on other rigs, such as the IC756.

Steve N9SZ

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com