[Elecraft] Line In problem ...

[Joe Subich, W4TV]

The problem ends up being an open L4 on the KIO3 Audio I/O 
board.  Obviously it was simply coincidence that the Line 
input failed shortly after installing the KRX3.  

I've simply tacked a jumper around L4 at the present time 
and will decide on a permanent fix later.  The more important 
question is why L4 would fail at all? 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe 
> Subich, W4TV
> Sent: Sunday, September 28, 2008 2:52 PM
> To: 'Elecraft List'
> Subject: [Elecraft] Line In problem ... 
> 
> 
> 
> 
> After installing the KRX3 in my original factory assembled 
> K3 (s/n 622), I find the "Line In" is unresponsive.  If I 
> run the Line In and Monitor levels at maximum, I can just 
> barely hear the input in the background.  
> 
> Line In was working normally prior to installing the KRX3. 
> Any idea where to start looking?  
> 
> 73, 
> 
>    ... Joe, W4TV 
>