[Elecraft] K3 - Two small UI suggestions

[Brett Howard]

Personally I prefer the alternating states as I always spin one way to
make the change.  

On Sun, 2008-09-28 at 12:03 -0700, Joe Planisky wrote:
> After playing with my K3 for a few days (FW rev 2.38), I've come up  
> with two small suggestions for a future firmware release, someday when  
> you have nothing better to do :-)
> 
> 1.) Make the TX indicator flash any time TX is disabled.  It already  
> flashes when in TX TEST mode, but I'd also like it to flash when TX is  
> disabled because I'm outside a ham band.
> 
> 2.) Make ALL menu items with only two possible states sensitive to  
> knob turn direction instead of alternating states.  Currently, to turn  
> on text decode in a data mode, I can turn the VFO B knob either  
> direction and get alternating ON / OFF states.  I'd like to turn it  
> clockwise to turn it ON, and turn it counter-clockwise to turn it  
> OFF.  The CONFIG:PWR SET works this way now and I think it would be  
> better if all ON/OFF-type items worked this way.
> 
> 73
> --
> Joe KB8AP
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com