[Elecraft] Loss of VFO B encoder control

[Don Wilhelm]

I have been reminded that the RIT uses a different encoder - sorry for 
the confusion.  Maybe I can write it off as a 'senior moment' - please 
excuse me for not checking the parts list first.

73,
Don W3FPR

Rick and Theresa Low wrote:
> Hello Don,
>
> The encoder in the VFO B spot does not change VFO B displayed frequency (and does not change any of the menu items, either.
>
> Thanks for the reply.
>
> 73 Rick N6CY
> Reston, VA
>
> -----Original Message-----
>   
>> From: Don Wilhelm <w3fpr at embarqmail.com>
>> Sent: Sep 27, 2008 6:53 PM
>> To: Rick and Theresa Low <n6cy at earthlink.net>
>> Cc: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] Loss of VFO B encoder control
>>
>> Rick,
>>
>> Does the VFO B knob change the frequency of VFO B?  If it does, there is 
>> nothing wrong with the encoder, and you should send a note to 
>> K3support at elecraft.com.
>>
>> If not, swap the encoder between VFO B and RIT (or VFO A and VFO B 
>> whichever is easiest for you) - if the problem follows the encoder 
>> position, ask for a replacement encoder.
>> If the problem stays with VFO B, then there is a front panel problem and 
>> you should ask K3support at elecraft.com for additional assistance.
>>
>> 73,
>> Don W3FPR
>>     
>