[Elecraft] Accessing Filter Settings in KRX3

[Joe Subich, W4TV]

Having just fought through the same issue ... 

Enter the CONFIG menu, select the FLx options, then press SUB. 
Pressing SUB is the key to getting into the filter configuration 
items for the KRX3.  At that point, set the various frequencies 
and gains ... don't for get to enable the appropriate fitters 
for each mode.  LSB, USB, CW, DATA, AM and FM must EACH have 
the appropriate filters enables/disabled individually. 

73, 

   ... Joe, W4TV 
 

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Roy Morris
> Sent: Sunday, September 21, 2008 4:58 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Accessing Filter Settings in KRX3
> 
> 
> I might have missed something or this just might be a dumb 
> question.  How do the filters I have in the KRX3 kick in, and 
> how can they be accessed (other than through CONFIG in SUB 
> and the K3 Utility)?  In other words, is it possible to 
> access KRX3 filters through XFIL?  It looks like the KRX3 
> filters are automatically selected depending on the bandwidth 
> selected on the main receiver.  Is this right?  Roy Morris  
> W4WFB