[Elecraft] K3 PSK31 with Digipan

Dave Quick - KØEKL k0ekl at arrl.net
Fri Sep 19 14:32:50 EDT 2008


I'd like to be able to transmit in Data-A mode through my 6 Khz AM filter.
Being able to see ~6 Khz of spectrum in the waterfall window would be great.

-Dave Quick KØEKL




-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Subich, W4TV
Sent: Friday, September 19, 2008 11:55 AM
To: 'zibs'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3 PSK31 with Digipan


> But in Data A mode, one can expand the receive width out to
> 4 kHz using the 2.7 kHz filter. If you attempt to transmit below 200 
> or above 2800 Hz, power output will drop to zero.

Perhaps all of the data modes should be limited to 2.8 KHz of DSP bandwidth
(or even 2 KHz).  That's more than enough for any reasonable amateur data
mode and will keep users from shooting themselves in the foot. 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of zibs
> Sent: Friday, September 19, 2008 10:28 AM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 PSK31 with Digipan
> 
> 
> 
> But in Data A mode, one can expand the receive width out to 4 kHz 
> using the 2.7 kHz filter. If you attempt to transmit below 200 or 
> above 2800 Hz, power output will drop to zero.
> 
> The user needs to be aware when clicking on the waterfall as one can 
> receive signals on frequencies in which they cannot transmit.
> 
> Steve N9SZ
> 
> 
> 
> Lyle Johnson wrote:
> > 
> >  > Just getting my new K3 working on PSK31 and noticed that
> it seems
> > to be  > > important to limit the range of the transmit frequency...
> > 
> > I just swept my K3 in DATA A mode.using the LINE IN jack
> for sourcing
> > the Tx audio.  It is flat from below 200 Hz to higher than 2800 Hz 
> > using a 2.,8 kHz IF filter.
> > 
> > Be sure you don't have TxEQ set to restrict the transmit bandwidth. 
> > TxEQ is active for *all* Tx audio paths in all modes.  For
> DATA A or
> > DATA AFSK, it should be flat.
> > 
> > 73,
> > 
> > Lyle KK7P
> > 
> > 
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft    
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> > 
> > 
> 
> --
> View this message in context: 
> http://n2.nabble.com/K3-PSK31-with-Digipan-tp1100818p1100983.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



More information about the Elecraft mailing list