[Elecraft] K3 VFO A/B [END of Thread]

[Eric Swartz - WA6HHQ, Elecraft]

Guys,

Let's end this thread for now.

If you have very specific suggestions, please email them directly to wayne.

Eric  WA6HHQ
Elecraft List Moderator
_..._
-----Original Message-----
From: Vic K2VCO <vic at rakefet.com>
Date: Sunday, Sep 14, 2008 12:48 pm
Subject: Re: [Elecraft] K3 VFO A/B
To: microham at microham-usa.com
CC: w3fpr at arrl.net, "'Elecraft'" <elecraft at mailman.qth.net>

Joe Subich, W4TV wrote:

> If you understood what I was saying, you were misrepresenting
 it.  The bottom line, MODE should be copied with FREQUENCY, 
 the other settings belong with either the second tap or left 
 for "B set, <setting> B set" procedure.  It's frequency and 
 mode that matter when setting up for split.  If the user has 
 a KRX3 and is doing dual or duplex, the second receiver will 
 likely have other settings (filter, RX Ant, AGC, etc.) that 
 should not be changed and they will need "B set, <setting>, 
 B set" in any case. 

How can you copy mode without copying bandwidth? Maybe it would have to 
be something like "if the mode is different, also copy the b/w, 
otherwise not".

Confusing.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com