[Elecraft] K3 - IF out - again

[Jerry Flanders]

If you have another receiver handy that can tune 8.2 MHz, use it to 
sniff at the K3 IF out. I think the signals are in the microvolt range.

Jerry W4UK

At 09:57 AM 9/10/2008, Jim Miller wrote:
>Thanks Dave, Jack and Jerry,
>
>I've got some reading to do.  I am not getting any signal out of the chip
>that clocks in the IF signal and drives the signal to the sound card.
>
>73, Jim KG0KP
>
>----- Original Message -----
>From: "Jack Smith" <jack.smith at cliftonlaboratories.com>
>To: "Jim Miller" <JimMiller at STL-OnLine.Net>
>Cc: "Elecraft Reflector" <elecraft at mailman.qth.net>
>Sent: Wednesday, September 10, 2008 5:04 AM
>Subject: Re: [Elecraft] K3 - IF out - again
>
>
> > I've provided a lengthy study of the K3's IF output port at
> > http://www.cliftonlaboratories.com/elecraft_k3_and_panadapters.htm
> >
> > Jack
> >
> >
> > Jim Miller wrote:
> > > Subject: [Elecraft] K3 - IF out
> > >
> > >
> > > Next stupid question,
> > >
> > > What is the output level of the IF out on the transverter KXV3 option?
> > > Do I have to turn on something to get it to activate?
> > >
> > > I am trying to connect a K3 Softrock V6.2 to use as a panadapter and
>cannot
> > > see any output on my scope (techtronics 475) from the IF output
>connector on
> > > the K3.
> > >
> > > Thanks es 73, de Jim KG0KP
> > > _______________________________________________
> > > Elecraft mailing list
> > > Post to: Elecraft at mailman.qth.net
> > > You must be a subscriber to post to the list.
> > > Subscriber Info (Addr. Change, sub, unsub etc.):
> > >  http://mailman.qth.net/mailman/listinfo/elecraft
> > >
> > > Help: http://mailman.qth.net/subscribers.htm
> > > Elecraft web page: http://www.elecraft.com
> > >
> > > _______________________________________________
> > > Elecraft mailing list
> > > Post to: Elecraft at mailman.qth.net
> > > You must be a subscriber to post to the list.
> > > Subscriber Info (Addr. Change, sub, unsub etc.):
> > >  http://mailman.qth.net/mailman/listinfo/elecraft
> > >
> > > Help: http://mailman.qth.net/subscribers.htm
> > > Elecraft web page: http://www.elecraft.com
> > >
> > >
> >
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com