[Elecraft] KRX3

[Brett Howard]

first off VFO IND is not yet implemented its listed in the ERRATA for
the owners manual.  If something doesn't work then its a good idea to
look in the owners manual errata document.  

Next you have to set your speakers to 1 if you're using the internal
speaker in the radio.  You can set it to 2 spkrs if you're using
headphones or stereo speakers out the back but otherwise you'll only
hear the primary RX.  

On Mon, 2008-09-08 at 23:36 -0400, Roy Morris wrote:
> I have just installed the KRX3 and set the filters for the main receiver.  The auxiliary KSYN3 has been calibrated.  CONFIG: VFO IND displays UNAVAIL.  Am I supposed to be able to set the filters on the SUB?  Is the SUB supposed to be operational letting me hear two frequencies simultaneously at this time, or is this coming in future firmware?  I presently get nothing out of SUB even when I set B-SET to antenna 1.  Advancing SUB RF and AF gain does not bring the receiver to life.  Do I have a problem?  Roy Morris  W4WFB
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com