[Elecraft] [K3] CONFIG 2 Tone

[Roy Morris]

My 2 TONE output is 53 watts on my PowerMaster meter with K3 power set to 100 watts on LSB and 43 watts on USB.  I am using v.2.57 firmware and I thought both sidebands were supposed to be usable.  My filter is 2.7 Hhz with a -.84 offset.  With 2 TONE turned ON the MIC control becomes TN1 which can be adjusted to plus or minus parameters that displays in the VFO B area.  I believe this increases the amplitude of tone #1.  Tone #1 is presently set at 0.  What control increases the amplitude of tone #2?  Why are my sidebands showing such a difference in power?  Could it be the skirt shape of the filter is different on each side which causes this?   I presume the two tone amplitudes can be adjusted using a scope.  Roy Morris  W4WFB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081026/1d79df32/attachment.htm