[Elecraft] K3 Beta firmware rev. 2.57

[wayne burdick]

We measured very close to 25 W here, but I'll look into it.

tnx
Wayne

On Oct 25, 2008, at 12:51 AM, Dave G4AON wrote:

> Wayne, the AM power level in this version only seems to produce a 
> carrier of 10 Watts when the requested power is "100W". While I don't 
> agree with the idea of calling the power anything other than the 
> carrier level, i.e. I would expect the power control to only go to 
> about 30 Watts on AM, 10 Watts is only 1/3rd of the carrier power a 
> 100 W nominal transceiver should produce.
>
> Back to the drawing board?
>
> 73 Dave, G4AON
> K3/100 #80
> ==========================================
>
> * MORE ACCURATE AM-MODE POWER LEVEL. Also slightly higher modulation
> percentage.
>
>
>
>

---

http://www.elecraft.com