[Elecraft] RX Out On K#

[Roy Davis]

Thanks to all for the input we didn't know we had to turn on the rx antenna 
on the front panel.

Roy and John




> We are trying to use a second external receicver wth the K3 by connecting 
> the RX ant out jack to the second receiver antenna input.
>
> But we are hearing no signals.  It appears to be necessary to swith the rx 
> antenna in and out jacks into the circut to make it work.
>
> We have switched the KXV3 to the "nor" position via the configuration 
> menu. "The manual says to switch it to on" but that choice is not 
> available.
>
> So it seems the KXV3 is on but there is no output, is there something else 
> we need to do?
>
> We need n answer next few hours, appreciate any help.
>
> Thank you ,
>
> WK4Y and K6AM
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>