[Elecraft] K3/100 no pwr out in CW mode

[Ralph Tyrrell]

Thanks to Bill,Greg, Kevin, Roger and maybe others.

Yes I had lost the VOX setting.

But CW stilled worked in SSB mode. That confused me.

Thanks to all.

73, Ty, W1TF


--- On Sat, 10/18/08, Kevin Rock <kevinrock at earthlink.net> wrote:

> From: Kevin Rock <kevinrock at earthlink.net>
> Subject: Re: [Elecraft] K3/100 no pwr out in CW mode
> To: w1tf at yahoo.com
> Date: Saturday, October 18, 2008, 3:05 PM
> Hi Ty,
>    Check your VOX setting.  CW and VOX are tied together
> for some silly reason.  Early on I set VOX to off and could
> not send CW.  I had to get out the manual and dig for it but
> finally found that was the reason for no CW output.
>    73,
>       Kevin.
> 
> 
> -----Original Message-----
> >From: Ralph Tyrrell <w1tf at yahoo.com>
> >Sent: Oct 18, 2008 12:18 PM
> >To: Elecraft at mailman.qth.net
> >Subject: [Elecraft] K3/100 no pwr out in CW mode
> >
> >
> >K3/100 #696, 02.38 -- 01.90
> >Last evening I had a nice QSO with 3 other statons on
> 60M.
> >This morning I have no output power in CW mode, in SSB
> all is normal all bands, including CW when I hit the key.
> >
> >(I had set CONFIG:CW WGHT to SSB+CW some time ago and
> it works.)
> >Just no output when mode is set to CW now.
> >
> >I had set PF1 to switch SPKR+PH on and off. Works FB.
> Since then I have had CW QSOs on 80,40 and 30M.
> >Then had the 60M QSOs, now no output in CW mode. 
> >I went thru the CONFIG list and did not find anything
> wrong. Must be missing something.
> >Help,
> >Thanks, Ty, W1TF


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com